The purpose of use
Expoglass glass cutting table is a machine which makes operation of glass cutting: easier, faster and safer. Usually it also reduces the number of necessary operators during the glass cutting process. The main three features which helps in glass cutting are: tilted top, breaking bars and air cushion system.
Loading the glass
The basic function of all glass cutting tables is to enable safe and convenient glass loading. Glass sheets, should be handled in a vertical orientation, otherwise they could break under their own weight. In our tables, in order to be able to put the sheets on the table safely and comfortably, it is enough to pull out the loading cantilevers from the table top, tilt the table top to an inclined position and place the panes on the brackets.
Breaking the glass
Breaking bars greatly improve the glass breaking process. After scoring the glass, it is enough to set the surface in such a way that the score is located above the bar and press the pedal under the table. Pressing the pedal causes the breaking bar to lift, pushing from the bottom along the score on the glass and the material breaks under its own weight. Depending on the orientation in which we cut the glass, we can use breakers - longitudinal or transversal.
Manipulating large and / or heavy panels
While manipulating large and / or thick glass sheets, large friction is generated on the worktop surface. This phenomenon makes it difficult for the operator to work, and in some cases may unable the operator to operate alone. An additional risk is scratching of the glass at the moment when there are pieces of glass or other dirt on the table. The occurrence of these problems can be minimized by using an aircushion system.